Reference-X 211SE Stereo Power Amplifier
The input stage is 5687WB tube use AudioCap Theta coupling cap to 5687WB driver tube, The driver tube use Cardas coupling cap to 6189A cathode follow driver stage, The cathode follow stage is direct coupling to 211 tube work at SET Single Ended Triode mode to driver Hasimoto special grade high quality output transformer , The Hasimoto CUT CORE orient high B output transformer has very low Insertion Loss 0.3dB only. ( Many SET tube power amplifier in Hi-End audio market , Their have the output transformers is over 2dB Insertion Loss . only about 10% very high price tube amplifier use under 1dB Insertion Loss of output transformer ) . The output transformer has low insertion loss is very important , the best of the best is 0 dB Insertion Loss , The output transformers for High End tube amplifier need under 1dB Insertion Loss . The Insertion Loss over 1.5dB output transformer will lost many low level music.
The power supply with two separately HVB+
power supply for power output stage and input driver stage:
One Hasimoto power transformer with Hasimoto C-core choke and 4 pcs GZ34
rectifier tubes for power output stage..
Other One Hasimoto power transformer for input and driver stage
This power amplifier case structure and parts arrangement are perfect, the signal path is directly and shortly connected. Great heat dissipation, an anti-shock and anti-RF function to guarantee it works at a very stable status. For sure, this machine is produced by point-to-point methodology.
Features
The speaker connections are Star(Germany)
Coupling caps use Jupiter Copper foil (wax paper and Polypropylene film) and MultiCap RTX
Hasimoto H-40-10S CUT CORE orient high B Output Transformer
Specifications
Output and T.H.D
: |
Input : RCA one pair |
Input Impedance : 100K ohm. |
Frequency Response: Test at 1W 20Hz ~ 63kHz
(20Hz -1.5dB, 20kHz -0.1dB, 63KHz -3dB) |
Input Sensitivity : 0.95V / 27W (rated output) 24.5dB Gain (test at 8ohm.) |
Output impedance : 4 ohm, 8ohm , 16ohm |
Noise: Less than 1mV |
Phase Mode : Normal |
Construction: Copper and High quality aluminum |
Tubes Required: 5687WA x2 ,6189A x2, 211 x 2, 5AR4(GZ34) x 4. |
Dimension: 430mm x 410mm x 300mm (W x D x H) |
Total Weight: 33kg |
Power Source: 110-117 or 220-240V,50/60Hz |
Actual Price: HK$41300
The output transformer from Hashimoto H-40-10S upgrade to Hashimoto special grade add extra cost HK$4500.
Hashimoto special
grade Output Transformer have better low frequency
response than H-40-10S.
Test at 1W 20Hz ~ 63kHz (20Hz -1dB, 20kHz -0.1dB, 63KHz -3dB)
Test at 27W 20Hz ~ 60kHz (20Hz -1.5dB, 20kHz -0.1dB, 60KHz
-3dB)
----------------------------------------------------------------------------------------------------------------------------------------------------------------
YS-Audio
Room1308, 13/F,BLK
C,.
Kai Tak FTY BLDG.
99-101 King Fuk ST,.
San Po Kong, KLN,.
Hong Kong
Tel:(852)93440168
E-mail : info@ys-audio.com
WhatsApp:
93440168
facebook : https://www.facebook.com/AudioExperienceYSaudio/