The Real 1605 SE power amplifier

The Real 1605SE Power Amplifier Old version

Audio Experience THE REAL 1605SE Mono Block Power Amplifier is a Class A SET Single Ended design power amplifier. It provides sound deep and wide stage, accompanies with reality sound image and a emotions sound presentation.

It uses one EML 1605 super triode power tubes working at Class A SET Single Ended Triode configuration status to provide 26W adequate output for most of the Hi-End Speakers to ideal performance. Moreover, the high quality output transformer combines with high performance Class A SE circuit design lead to an extremely low loss, wide sequence sound effect and excellent phases output. This power amplifier case structure and parts arrangement are perfect, the signal path is directly and shortly connected. Great heat dissipation, an anti-shock and anti-RF function to guarantee it works at a very stable status. For sure, this machine is produced by point-to-point methodology.

The input/driver stage is new design for EML 1605 power tube, it uses 12AU7 input tube and 5687WB driver tube working at Class A PP mode to driver Hasimoto A-105 Interstage transformer, This new design driver stage got the low distortion and wide frequency range. The interstage transformer direct coupling stage to EML 1605 power tube , The EML 1605 power tube working at Class A SET Single Ended Triode mode to driver Hasimoto H-30-3.5S output transformer , The Hasimoto Hasimoto H-30-3.5S CUT CORE orient high B output transformer has very low Insertion Loss 0.3dB only. ( Many tube power amplifier in Hi-End audio market , Their have the output transformers is over 1dB Insertion Loss . only about 10% very high price tube amplifier use under 1dB Insertion Loss of output transformer ) . The output transformer has low insertion loss is very important , the best of the best is 0 dB Insertion Loss , The output transformers for High End tube amplifier need under 1dB Insertion Loss . The Insertion Loss over 1.5dB output transformer will lost many low level music.

The components , NFB value , tube type , circuit all select by listen test.

Features

EML 1605 Super Triode power tube
New design 12AU7 and 5687WA driver tubes working at PP mode ( low distortion and wide frequency range ).
SONICAP coupling capacitor
UniCrystal OCC (Ohno Continuous Cast) Copper wire and PCOCC copper wire.
Jensen input transformer for balanced (XLR) input.
Hasimoto A-105 Interstage Transformer to driver EML 1605 power tube.
Hasimoto H-30-3.5S CUT CORE orient high B Output Transformer
Hasimoto C-10-200W Choke
Hasimoto special grade Power Transformer

Hasimoto C-10-200W CUT CORE orient high B Choke.

Hasimoto A-105 CUT CORE orient high B Interstage Transformer

Hasimoto H-30-3.5S CUT CORE orient high B Output Transformer

wide frequency range , low distortion , low phase shift , good damping factor .

Specifications

Output and T.H.D :

1W per channel , 1kHz total harmonic distortion typically 0.3%
26W per channel , 1kHz total harmonic distortion typically 5% (rated output)

Max 80W per channel.

Input : RCA and XLR

Input Impedance : RCA is 100K ohm , XLR is 10K ohm

Frequency Response:

Test at 1W 20Hz ~ 80kHz (20Hz -0.28dB, 20kHz -0.26dB, 80KHz -1dB)
Test at 26W 20Hz ~ 80kHz (20Hz -2.6dB, 20kHz -0.3dB, 80KHz -3dB)

Input Sensitivity : 1V / 26W (rated output)

Output impedance : 4 ohm , 8ohm , 16ohm.

Noise: Less than 1mV

Phase Mode : Normal

Construction: Copper and High quality aluminum

Tubes Required: 12AU7 x2 , 5687WA x2 , EML 1605 x 2, 5R4GYB x 2

Dimension: 430mm x 340mm x 280mm (W x D x H)

Total Weight: 38kg ( total two block )

Power Source: 110-117/220-240V,50/60Hz

Actual Price:
With XLR input HK$55000 one pair.
Without XLR input HK$53800 one pair.

YS-Audio
Room1308, 13/F,BLK C,.
Kai Tak FTY BLDG.
99-101 King Fuk ST,.
San Po Kong,   KLN,.
Hong Kong
Tel:(852)93440168
E-mail : info@ys-audio.com
WhatsApp: 93440168
facebook : https://www.facebook.com/AudioExperienceYSaudio/