YSA2A3 2A3SE Integrated Stereo Valve Tube Amplifier

YSA-2A3 4W+4W Integrated Stereo Valve Tube Amplifier

Audio Experience YSA2A3 is a 4W + 4W Integrated Stereo Valve Tube Power Amplifier.

The power amplifier use one 2A3 power tubes work at SET Single Ended Triode configuration status to provide 4W adequate output . Moreover, It use the high quality output transformer ( Hasimoto . made in Japan).

The line preamp stage use 6SJ7 tube , The driver stage use 6SN7 to driver 2A3 power tube . The 2A3 tube work at SET Single Ended Triode mode to driver Hasimoto HC-203U high quality output transformer , The Hasimoto HC-203U EI output transformer has very low Insertion Loss 0.6dB only. ( Many SET tube power amplifier in Hi-End audio market , Their have the output transformers is over 2dB Insertion Loss . only about 10% very high price tube amplifier use under 1dB Insertion Loss of output transformer ) . The output transformer has low insertion loss is very important , the best of the best is 0 dB Insertion Loss , The output transformers for High End tube amplifier need under 1dB Insertion Loss . The Insertion Loss over 1.5dB output transformer will lost many low level music.

This power amplifier case structure and parts arrangement are perfect, the signal path is directly and shortly connected. Great heat dissipation, an anti-shock and anti-RF function to guarantee it works at a very stable status. For sure, this machine is produced by point-to-point methodology.

Features

6SJ7 preamplifier tubes
6SN7 driver tubes
SONICAP coupling capacitor
Hasimoto HC-203U EI Output Transformer
Hasimoto CC-10-200W Choke
Hasimoto PT-160 Power Transformer

Specifications

Output and T.H.D :
1W per channel , 1kHz total harmonic distortion typically 0.5%
4W per channel , 1kHz total harmonic distortion typically 4% (rated output)

Input : 4 pair RCA

Controls : Volume, Input Selector , balanced , Power On/Of

Input Impedance : RCA is 100K ohm

Frequency Response:

Test at 1W 20Hz ~ 30kHz (20Hz -0.25dB, 20kHz -1.6dB, 30KHz -3dB)
Test at 4W 20Hz ~ 30kHz (20Hz -1.7dB, 20kHz -1.3dB, 30KHz -3dB)

Input Sensitivity : volume at MAX , 0.13V / 5W (rated output), 34dB gain (test at 8 ohm)

Output impedance : 4 ohm , 8ohm , 16ohm

Noise: Less than 1.5mV

Phase Mode : Normal

Construction: Copper and High quality aluminum

Tubes Required: 6SJ7WA x2 , 6SN7 x2 , 2A3 x 2, 5AR4 x 1

Dimension: 400mm x 300mm x 210mm (W x D x H)

Total Weight: 15kg

Power Source: 110-117/220 or 240V,50/60Hz

　Actual Price: HK$17,300

YS-Audio
Room1308, 13/F,BLK C,.
Kai Tak FTY BLDG.
99-101 King Fuk ST,.
San Po Kong,   KLN,.
Hong Kong
Tel:(852)93440168
E-mail : info@ys-audio.com
WhatsApp: 93440168
facebook : https://www.facebook.com/AudioExperienceYSaudio/