The Real phono MK2

The Real Phono MK2 Phono Amplifier.

Flagship grade phono amplifier.

The main stage with external power supply , two unit design.

THE REAL Phono MK2 use T-LCR type RIAA EQ design, the T-LCR Type is best method for revive RIAA EQ, also is highest cost design.

The new design input stage is 6DJ8 tube direct coupling to 6C45 tube driver Hasimoto line output transformer , special made T-LCR type RIAA EQ , 5687WB tube driver Hasimoto line output transformer for output stage( with XLR and RCA output).

THE REAL Phono MK2 's application of a highly efficient solid-state voltage regulator with EZ80 Tube for current regulator and Hasimoto choke in each HVB+ power supply . Also it use the external power supply get highest S/N. The power supply is dual mono design, each channel with two separately HVB+ power supply for input stage and output stage, so the power with total four separately HVB+ power supply

It has two pair MC-step up transformer , They are Hasimoto HM-7 ( made in Japan ) and Jensen JT-347-AXT(made in USA) top model MC step-up transformer .

Features

New input stage 6DJ8 tube direct coupling to 6C45 tube driver line transformer in input stage.
5687WB with Hasimoto line transformer in output stage.
V-Cap CuTF coupling cap at output stage.
Vishay VTA55 , /Dale RN55 , AMRA Resistors
LCR network use Hasimoto Inductive
Hasimoto HM-7 MC step-up transformer.
Jensen JT-347-AXT MC step-up transformer.
Four pair MC input, One pair MM input.
Output with both XLR and RCA
Phase select switch Normal / Inverse
External power supply
Two Hasimoto power transformer , Eight Hasimoto Choke , four EZ80 tube at HVB+ power supply
Phase select switch Normal / Inverse

Two MC impedance select switch with 6 position for T1 and T2 MC step-up transformer.

Gain select switch with 6 position gain

THE REAL Phono MK2 MM version

Specifications

Controls.
Power Supply : Power On/Of .

Main Unit :
Phase Normal / Inverse , Gain select.
MC/MM select, T1 / T2 MC-step transformer select, T1A / T1B MC input select, T2A / T2B MC input select.
T1 MC Gain High/Low select, T2 MC Gain High/Low select,
T1 MC impedance select, T2 MC impedance select.

Output : 1 pair Main XLR , 1pair Main RCA.

Input : T1A MC input , T1B MC input , T2A MC input , T2B MC input, MM input . ( all RCA ).

Output Impedance :
600 ohms ( XLR and RCA same ) , 600 ohms minimum load.

Frequency Response: +/- 0. 2dB 20Hz to 20KHz , RIAA equalized

Input Impedance:

T1
MC low gain:
520 ohm , 350 ohm , 200 ohm , 100ohm , 75 ohm , 50 ohm
MC high gain:
133 ohm , 90 ohm , 52 ohm , 30 ohm , 20 ohm , 10 ohm

T2
MC low gain:
2K5 ohm , 1K5 ohm , 730 ohm , 440 ohm , 290 ohm , 190 ohm
MC high gain:
1k1 ohm , 650 ohm , 320 ohm , 220 ohm , 130 ohm , 83 ohm

MM is 47K / 100P ( the capacitance impedance can change by module )

Gain:
1 is MM 45dB , MC-T2-low 62dB , MC-T2-High 65dB , MC-T1-Low 68.5dB , MC-T1-high 74.5dB
2 is MM 44dB , MC-T2-low 61dB , MC-T2-High 64dB , MC-T1-Low 67.5dB , MC-T1-high 73.5dB
3 is MM 43dB , MC-T2-low 60dB , MC-T2-High 63dB , MC-T1-Low 66.5dB , MC-T1-high 72.5dB
4 is MM 41.5dB , MC-T2-low 58.1dB , MC-T2-High 61.5dB , MC-T1-Low 65dB , MC-T1-high 71dB
5 is MM 40dB , MC-T2-low 57dB , MC-T2-High 60dB , MC-T1-Low 63.5dB , MC-T1-high 69.5dB
6 is MM 37dB , MC-T2-low 54dB , MC-T2-High 57dB , MC-T1-Low 60.5dB , MC-T1-high 66.5dB

Noise: MM 93dB (shorted input) , MC 92dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output, A weighted

Phase Mode : Normal / Inverse.

Max input : MM 90mV , MC 9mV

Distortion: Less than 0.16% at 2V RMS 1kHz output.

Tube Compliment : 6DJ8 x2, 6C45 x2 , 5687WB x2, EZ80 x4.

Dimension:
Main unit , 455mm x 350mm x 210mm (W x D x H)
Power Supply ,455mm x 410mm x 210mm (W x D x H)

Total Weight: 35kg

Power Source: 110-127 , 220 - 240V,50/60Hz for order.

Actual Price: HK$83,300
　

YS-Audio
Room1308, 13/F,BLK C,.
Kai Tak FTY BLDG.
99-101 King Fuk ST,.
San Po Kong,   KLN,.
Hong Kong
Tel:(852)93440168
E-mail : info@ys-audio.com
WhatsApp: 93440168
facebook : https://www.facebook.com/AudioExperienceYSaudio/